we do upwards of 75,000 NAT sessions on an asa-5550 with no problems;
bad thing here for you is that you'll also need a router platform to do
the route maps
not sure if you can split the functions, but if so then this might work
for you.
--
Regards,
Ge Moua
Network Design Engineer
University of Minnesota | OIT - NTS
--
On 10/13/10 4:11 PM, Dan Letkeman wrote:
Hi,
Wondering if anyone has some experience with the NAT limitations on a
2821 router? I have about 1500 users, which about half of them are on
the internet at one time, but we have a proxy web filter appliance
that all of the clients connect to that does a website lookup, and
check before it lets the client access the page, so it creates a
separate entry for every page requested. This doubles the NAT entries
in the router.
Would 40,000 - 60,000 NAT translation entries be too much for a 2821?
It's not doing much else except NAT and a couple of route-maps.
If so would device would be recommended that could handle this amount
of translations?
Thanks,
Dan.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
