Tim, It seems that some of the basic functions we need for this in EEM are not yet on SXI... Unfortunately, it does not have the latest EEM code yet. I guess it would be possible with TCL, but I can't give you a quick example for this right now...
I suggest you try http://forums.cisco.com/eforum/servlet/EEM?page=main Maybe you can find a good example to start with... I will try to spend some time on this later if I can... Arie -----Original Message----- From: Tim Durack [mailto:[email protected]] Sent: Saturday, October 30, 2010 23:34 To: Arie Vayner (avayner) Cc: [email protected] Subject: Re: [c-nsp] switchport trunk allowed vlan On Sat, Oct 30, 2010 at 5:16 PM, Arie Vayner (avayner) <[email protected]> wrote: > Tim, > > Can you please explain a bit better what you would like to achieve? Sure. The following command format is relatively safe: switchport trunk allowed vlan <add/remove/all/except/none> <range> However, if one forgets to include the <add/remove/all/except/none> keyword, the command defaults to replace: switchport trunk allowed vlan <range> This isn't usually the desired result. I would like to disable the use of: "switchport trunk allowed vlan <range>", and replace it with a custom EEM command like: "switchport trunk allowed vlan range <range>". This would correct a dangerous IOS syntax. I don't know if this is really possible, but it could be an interesting exercise in demonstrating the power of EEM :-) > Also, which IOS version please? C6K, Sup720, 12.2(33)SXI3 > Tnx > Arie > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Tim Durack > Sent: Friday, October 22, 2010 19:22 > To: [email protected] > Subject: [c-nsp] switchport trunk allowed vlan > > Anyone know what an EEM policy would look like to allow: > > rtr-1(config-if)#switchport trunk allowed vlan ? > add add VLANs to the current list > all all VLANs > except all VLANs except the following > none no VLANs > remove remove VLANs from the current list > > But deny: > > rtr-1(config-if)#switchport trunk allowed vlan ? > WORD VLAN IDs of the allowed VLANs when this port is in trunking > mode > > I know I can create an alias for adding/removing, but I would like to > see if I can disable the more dangerous form of this command ;-| > > -- > Tim:> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Tim:> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
