As I understood sometime ago was that 6148 modules have common buffers for 1-8, 9-16, 17-24 etc. If the buffer is full and output queue drops the packet then the same number of drops will show up in all eight-ports for that buffer.
Mack On Wed, Nov 3, 2010 at 6:14 PM, ML <[email protected]> wrote: > Looking at the output drops of the interfaces on a WS-X6148-GE-TX module I > noticed the output drops were the same in groups of 8 ports (excluding > non-connected ports). i.e. 1-8,9-16,17-24, etc > > http://pastebin.com/kT7XGsVg for those interested. > > > Is this some sort of architecture artifact? Makes monitoring a little more > difficult. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
