On Tue, Nov 16, 2010 at 01:06:43PM -0400, Sharlon R. Carty wrote: > Hello, > > I have a odd situation. I created a SVI on a 3560 switch, assigned an IP > address(public) without enabling ip routing and I was able to remotely > access the switch. > No default route added or anything like that. So how is it that I am able to > access the switch? > switch is connected to another switch which has a trunk connection to a > cisco 7206.
If the source IP that you are connecting from is in the same subnet as the SVI you created, a return route exists via connected interface, and no default route is needed. Another case would be an incorrect netmask, with proxy-arp enabled on another ip-routing device in the broadcast network. -- Brandon Ewing ([email protected])
pgp47B1M3uzWB.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
