You may find upgrading the ROM monitor software solves this! I had an 1841 that has a broken flash slot so wanted to manually boot from USB. Had to upgrade the ROM monitor software to get it to recognise USB drive over a certain size, as I could only find a 512M USB drive. After upgrading the ROM it worked OK although it won't boot from USB automatically!
Regards Nigel > On Wed, 24 Nov 2010, Lukasz Bromirski wrote: > >> I also don't understand why the 1841 rebooted while inserting >> flash, but I'm also using 2GB SanDisks and they're working fine. >> > > Strange. It rebooted (and wouldn't boot from it) when inserting a > larger than 128M flash (I tried a few), but not with 32-128M flash. > > I'm going to have to try again with some other CFs and see if I > still have the problem. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
