Thanks all
> Date: Sat, 27 Nov 2010 13:10:06 +0200 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [c-nsp] VPLS Simulation > > you can only do AToM on gns. cisco support vpls on specific card and > platforms. eg 7600 series and some specific card on that series. > > > 2010/11/25 Robert Maier <[email protected]> > > > the only "switch" you can use in GNS is a NM-16ESW module, i don´t think > > that this module supports VPLS. Maybe you have this option a simulator like > > Boson oder packettracer ?But i think, chances are not good > > > > Am 24.11.2010 23:04, schrieb Mohammad Khalil: > > > > i have looked into GNS3 but it does not support VPLS simulation > >> is there anyway i can simulate VPLS ? > >> > >> Thanks > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > >> > >> _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
