HI,
I have a ASA Firewall 5550 connected to both outside and customer interface.
Default route is there towards outside interface (Internet). 7600 router is
connected towards customer interface and ospf is running.
Now i have one private network (10.10.10.0/24) on 7600 router. I want to
access one machine having IP 10.10.10.15 from other place via internet
(it required to be access from anywhere internet) . I have tried to do the
static nat for the same ip in firewall, but still i am not able to receive the
icmp reply. I have checked through wireshark and found that the source coming
to the 10.10.10.15 was 77.77.77.77 which is not available on the 7600 router
but reachable through firewall.
following are the command
static (customer,outside) 119.252.X.X 10.10.10.15 255.255.255.255
(we have our own public ip's i.e 119.252.x.x)
So how i can access the machine or any other config i can to fullfill my
requirement.
Regards
Bunny
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
