Venny, Alll I want to route a range of IPs (pppoe customers) to certain upstream and the other to another upstream
I have BGP with both upstreams, links to upstraems are not equal in bandwidth and I could not figure out a way to achieve load sharing/fail-over in BGP to control ingress traffic so to answer your question: YES i'm trying to change the next hop based on the source ip Sharef On Tue, Nov 30, 2010 at 11:36 PM, Abello, Vinny <[email protected]>wrote: > Are you talking about using a policy map or simply a route-map on a BGP > neighbor? What exactly are you trying to accomplish? Are you trying to > change the next-hop based on the source address? > > Vinny Abello > Network Engineer > Dell | Physician Services > office +1 973 940 6125 > mobile +1 973 868 0610 > [email protected] > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Sharef Mustafa > Sent: Tuesday, November 30, 2010 10:28 AM > To: [email protected] > Subject: [c-nsp] policy based routing & CPU / MEM > > I want to use route-maps and BGP to route traffic based on source IP, but > I'm not sure of it's impact on the performance of the box > I use cisco 7206 VXR NPE-G2 serving 2000 pppoe customers. > > Did anyone try policy based routing (route maps with BGP) on such > environment? > > if so what was it's impact on the CPU, memory and performance? > > Thanks > > > Sharef > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
