There is no easy template for CoPP on Cisco. Some things are processed in hardware, some are processed in software. It is platform dependent.
Mack Network Architect -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bill Blackford Sent: Friday, December 03, 2010 9:31 AM To: 'cisco-nsp List' Subject: [c-nsp] Control-Plane Filters/ACLs Hello C-NSP members. I am looking for some good examples of "router-protect" ACLs or FW filters. On my "J" gear, I have several firewall filters designed to protect the control-plane that simply get applied to the loopback. Now only certain hosts/networks can make SSH, FTP, TCP179, etc., connections "to" the routers. Are there some templates or examples I can find? I haven't played much with CoPP and don't hear a lot of accolades for doing this. The other obvious question would be "does this run in hardware or in software?". Hmm, doubt if the packet ASICs are processing ACL's. Any help would be appreciated. Thank you, -b -- Bill Blackford Senior Network Engineer Technology Systems Group Northwest Regional ESD Logged into reality and abusing my sudo priviledges _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
