Hi, On 4 December 2010 01:48, Dmitry Kiselev <[email protected]> wrote: > Hello! > > Does somebody in the list have any info about plans to support policing on > etherchannel on ASR1000 platform? Both trains 12.2 and 15.0 does not support > it. :( > > Restrictions for Traffic Policing > - Traffic policing is not supported on the EtherChannel interfaces.
To be honest I would not expect that any time soon. If you consider that your interfaces can be on different SIPs and that near realtime communication between is required to do shaping or policing you can see the complexity of the task. Since we encountered exactly the same problem we decided to go down a slightly different route. We only use 2 links (or potentially 4 links) EtherChannels to allow for more equal load balancing. Then we apply somewhat more relaxed (in comparison with what we want to achieve) policies to the physical interfaces that constitute the bundle. It's not ideal, but so far this is the only way around we found. This is for outbound only as well. For inbound traffic we relay on the other end of the links. kind regards Pshem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
