Correct it doesnt do distributed bfd but the command allows the line cards
to do the packet return processing when in async mode. Cant remember if this
is dfc only modules or not...
On Dec 7, 2010 9:23 AM, "Pete Lumbis" <[email protected]> wrote:
> BFD is only processed on the linecard on the GSR. For the 6500/7600
> this is still done on the CPU, but it is done in the interrupt
> context, making it preferred over something like Fast Hellos which is
> handled as part of normal process scheduling.
>
> I think there are plans to make BFD distributed on the 6500/7600
> platforms, but it's not here yet.
>
> -Pete
>
> On Tue, Dec 7, 2010 at 8:16 AM, Chris Evans <[email protected]>
wrote:
>> The command is used so that on the far end the packet doesnt get punted
to
>> the cpu. The line card processes the return.
>> On Dec 7, 2010 6:59 AM, "selamat pagi" <[email protected]> wrote:
>>> According to Ciscos config guide, *no ip redirects* need to be
configured
>>> for BFD
>>>
>>> I'm trying to understand why this is required.
>>>
>>> thanks, keti
>>> _______________________________________________
>>> cisco-nsp mailing list [email protected]
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> _______________________________________________
>> cisco-nsp mailing list [email protected]
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
