This came and went on a sup720 3bxl on SXI5. It didn't fail over to slave and didn't drop any traffic either...all lights are still green. TCAM corruption?
3w1d: %CONST_DIAG-SP-3-HM_TEST_FAIL: Module 6 TestSPRPInbandPing consecutive failure count:5 3w1d: %CONST_DIAG-SP-6-HM_TEST_INFO: CPU util(5sec): SP=19% RP=3% Traffic=0% netint_thr_active[0], Tx_Rate[6361], Rx_Rate[234], dev=4[IPv6, fail=5] 3w1d: %CONST_DIAG-SP-4-HM_TEST_WARNING: Sup switchover will occur after 10 consecutive failures 3w1d: %CONST_DIAG-SP-3-HM_TEST_FAIL: Module 6 TestSPRPInbandPing consecutive failure count:10 3w1d: %CONST_DIAG-SP-6-HM_TEST_INFO: CPU util(5sec): SP=7% RP=1% Traffic=0% netint_thr_active[0], Tx_Rate[5021], Rx_Rate[276], dev=4[IPv6, fail=10] 3w1d: %CONST_DIAG-SP-4-HM_TEST_WARNING: Sup switchover will occur after 10 consecutive failures 3w1d: %CONST_DIAG-SP-3-HM_TEST_FAIL: Module 6 TestSPRPInbandPing consecutive failure count:15 3w1d: %CONST_DIAG-SP-6-HM_TEST_INFO: CPU util(5sec): SP=7% RP=2% Traffic=0% netint_thr_active[0], Tx_Rate[4868], Rx_Rate[292], dev=4[IPv6, fail=15] 3w1d: %CONST_DIAG-SP-4-HM_TEST_WARNING: Sup switchover will occur after 10 consecutive failures 3w1d: %CONST_DIAG-SP-3-HM_TEST_FAIL: Module 6 TestSPRPInbandPing consecutive failure count:20 3w1d: %CONST_DIAG-SP-6-HM_TEST_INFO: CPU util(5sec): SP=8% RP=1% Traffic=0% netint_thr_active[0], Tx_Rate[5250], Rx_Rate[234], dev=4[IPv6, fail=20] 3w1d: %CONST_DIAG-SP-4-HM_TEST_WARNING: Sup switchover will occur after 10 consecutive failures 3w1d: %CONST_DIAG-SP-6-HM_TEST_RECOVERED: Module 6 TestSPRPInbandPing recovered after 22 consecutive failure(s) -- Randy M. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
