Hi all, I tried to update up to version 7.2 from 6.3 on my PIX firewall.
I tried to copy new ios image on the flash memory, but I observed that session with my tftp is hung, however before that i successfully done command "write net tftp:pixconfig". So, I waited more than 2 hours and interrupted connection with tftp, because decide to upgrade under monitor mode. And now i got the new problem. While attempting to reload, I got next fw# reload Proceed with reload? [confirm] Currently writing image. Cannot reload. Ok, I attempted to copy image again from tftp and got next fw# copy tftp://xx.xx.xx.xx/pix724-9.bin flash copying tftp://xx.xx.xx.xx/pix724-9.bin to flash:image tftp: could not open udp/0/12345/xx.xx.xx.xx/69 Open tftp/0/213.130.30.195/pix724-9.bin failed So, my upgrade procedure unfortunately not turned. Help me please. What should i do to resolve this issue? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
