I'm a little confused regarding DSCP Trust support at 67xx linecards at 6500 platform. Documentation says that COS Trust should be used. Same shows me sh int capability. Exception is WS-X6708-10GE card where DSCP is also supported.
Slot 1 - module WS-X6748-GE-TX, Sup720-3B, 6509-E, IOS 12.2(33)SXI5. #sh int gi1/1 capa | inc QOS QOS scheduling: rx-(1q8t), tx-(1p3q8t) QOS queueing mode: rx-(cos), tx-(cos) But I configured without problem on this port DSCP Trust as below: # sh run int gi1/1 interface GigabitEthernet1/1 ... mls qos trust dscp ! Will it work ? Or it just parser mistake and I must configure "mls qos trust cos" ? Thanks, Robert _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
