http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800a3a25.shtml <<< should cover you off.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of JA Colmenares Sent: Thursday, 6 January 2011 2:54 PM To: Cisco NSP Forum Subject: [c-nsp] How to limit bandwidth on CISCO switch interfaces I need to limit bandwidth on the trunk ports of two connected switches(2960 to 3750). It is currently transmitting at 100 mbps and I want to limit it to 50 mbps How can this be done? can anyone provide any steps or resources to get this done. Thanks Juan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ Buy your loved one the gift of peace of mind with an RACQ gift membership. Join the Club today at www.racq.com/membership, 13 1905, 24 hours every day or in store Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail [email protected] or contact RACQ on 13 19 05. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
