There is the smartports macros feature on switches only and it works differently than you described - you have to apply macro to the interface/interface range every time you've changed it and it does not replace but adds the configuration to the existing configuration on the port.
On Thu, Jan 6, 2011 at 10:37 AM, Mark Meijerink <[email protected]> wrote: > Hi there, > > I wonder if Cisco supports features like port profiles for interfaces. I > would like to configure a profile and then configure an interface to have a > certain profile. So when I change the profile all the interfaces with that > profile will be reconfigured, Does anyone know if Cisco supports this kind of > feature? Thanks in advance. > > Regards, > Mark > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
