Hi, I have a relatively simple question but the examples I find on cisco.com don't seem to do much but confuse me.:)
Here's the setup. I have a Cisco ASA with several site to site VPN tunnels terminated to branch offices. All to date have used static IP addressing on both sides so using the tunnel-group a.b.c.d type l2l has been very simple. We now have a branch with PPPOE DSL and dynamic addressing. Could someone provide an example of the ASA side how to accept a VPN site to site session from a remote device using a dynamic IP. What do you use instead of the target tunnel-group / peer address entry? Presently the ASA is running 8.2.x code using a normal dynamic map for remote clients and the standard crypto map entries for each peer. I assume it's some variation on the dynamic map theme but not quite sure how to make that work. Any pointers would be appreciated. Thanks Scott _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
