Klementina, Turned out to be two DIP switches inside the cover of the device. Flipped them both and VOILA!!!
------Original Message------ From: Klementina Miloslava To: Jose Madrid Cc: cisco-nsp Subject: Re: [c-nsp] TrendNet TFC1000 Media Converter Sent: Jan 12, 2011 3:11 PM Perhaps, it's faulty. Can does the media converter work with any other gear? On Wed, 12 Jan 2011, [email protected] wrote: > I have a TrendNet TFC1000S20 media converter connected to a provider > uplink with single mode fiber and via copper to a Cisco 4900M. I get > link on both sides and all ports appear up but can't pass any traffic. > I connected the provider uplink direct to another device and it comes up > immediately. There are no settings or dip switches on the media > converter. Can anybody help me out? What am I missing here? All of the > optics match and the config of the switch is straightforward. > > > Sent via BlackBerry by AT&T > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > Sent via BlackBerry by AT&T _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
