Hi, Are you using the FWSM in a transparent setup where you do routing on the supervisor or are you running the FWSM in routed mode?
Rgrds Lars Eidsheim [nt] -----Opprinnelig melding----- Fra: Peter Boekelaar [mailto:[email protected]] Sendt: 24. januar 2011 09:08 Til: Lars Eidsheim; [email protected] Emne: RE: 6500 SUP720 datacenter setup Hi, > Another solution might be to use FWSM as a transparent firewall (see > diagram below). I would prefer to terminate interfaces on the 6500 > rather than on the FWSM in a routed setup. We use FWSM on 6500 it Works great, however its nearing end of life (Cisco is working on new blade, but I couldn't get timeline fort hat one). Ipv6 is handled by CPU and there is no failover support for ipv6. Ciao -- Peter Boekelaar _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
