* Tóth András <[email protected]> [2011-01-22 00:04]: > Hi Sebastian, > > There is a solution for your problem for 4500 switches which is called > per-vlan capture mode. You can enable it with the 'access-list > hardware capture mode vlan' command. This will make sure special > multicast traffic is punted to CPU only in case there's an SVI for > that vlan. > > Refer to the "Selecting Mode of Capturing Control Packets" section on > the following link: > http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/54sg/configuration/guide/secure.html#wp1128851
Hi Andras, do you know if that is also true for the SUP 6-E? http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/54sg/command/reference/ch2a_ins.html#wp1582722 states that the command is not supported on SUP 6-E. The document at the URL you posted doesn't show these limitations. I have the command available on our SUP 6-E catalyst but I didn't try it. Regards, Sebastian -- New GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) Old GPG Key-ID: 0x76B79F20 (0x1B6034F476B79F20) 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE. -- Terry Pratchett, The Fifth Elephant _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
