On Wed, 26 Jan 2011, Nick Hilliard wrote:
On 26/01/2011 14:01, Mohammad Khalil wrote:
i am facing overruns problem , does changing the queuing mechanism
solves this issue?
No. An overrun indicates a physical problem which caused packet corruption.
Check to make sure that your duplex settings are correct on both sides, and
if they are, it's probably the cable that's causing the problem.
<http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfd6.shtml>
This document doesn't agree with you:
"overrun Description: The number of times the receiver hardware was
unable to hand received data to a hardware buffer. Common Cause: The input
rate of traffic exceeded the ability of the receiver to handle the data. "
--
Mikael Abrahamsson email: [email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
