Hi David, On 27/01/2011, at 5:29 PM, Dovid Bender wrote:
> 1) I do not know much about Cisco. I assumed that if one router failed then > the second one would do the BGP. > 2) We have an AS and I was told that we would need to BGP to advertise our > IP's. We also need to do it so we are ISP independent and can decide who to > work with. I would recommend using BGP in such a circumstance > 3) What other information would you need ? Like I said I am a bit of n00b > here. Budget and Network Plans. Personally, I would suggest getting some external consulting - perhaps one of your providers can provide this. Depending on how you do your load balancing, you may not require full feeds. The hardware you will be looking at will probably be a pair of ASR1001s http://www.cisco.com/en/US/products/ps9343/prod_models_comparison.html or a Cisco 3900s http://www.cisco.com/en/US/products/ps10536/prod_series_comparison.html But all this depends very much on your network plan. Regards Andrew _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
