On 28/01/2011 20:21, Deric Kwok wrote:
1/ ls it same as ASA?
yes
2/ How about the physical connection? using Hub or switch. eg: router
--- hub A ----then one is active --- hub B
hub A --- one is standy --------
hub B
Yes, this configuration will work. The connection should be a layer 2
link. You can't use a routed link with a L3 gateway in the middle.
3/ I know it needs same ios and licence, Do it have special requirement?
no.
4/ Where is port for cross over cable between active and standy?
you need two ports, one to signal failover, and the other to transmit the
firewall state.
Nick
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
