You could try a MIB walk to determine the proper OID. ________________________________________ From: [email protected] [[email protected]] on behalf of Scott Voll [[email protected]] Sent: Thursday, February 03, 2011 10:23 AM To: [email protected]; [email protected] Subject: [c-nsp] SNMP Question
I'm trying to monitor my PRI utilization with Cacti. I have found that for my 3845 (running 15.0) with PRI in slots 0/0/0 I can use OID 1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0 But I'm having trouble finding PRI's in slots 0/1/0 and 0/1/1. How do you normally go about finding the OID that you want to monitor? Sorry if this is a Newb question. I've tried using MIB Viewers without success. TIA Scott _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
