Maybe I didn't explain myself very well but, here is what I want to do:
Fa0/0 = WAN at 10 Mbps Fa0/1.100 & Fa0/1.101 currently rate-limited each at 8 Mbps rate-limit input 8192000 1536000 2048000 conform-action transmit exceed-action drop rate-limit output 8192000 1536000 2048000 conform-action transmit exceed-action drop But Fa0/1.100 & Fa0/1.101 should never go over 8 Mbps together so they won't saturate my 10 Mbps WAN and always have 2 Mbps left From: Chris Evans [mailto:[email protected]] Sent: woensdag 2 februari 2011 23:01 To: Pshem Kowalczyk Cc: [email protected]; Rens Subject: Re: [c-nsp] rate-limit 2 subinterfaces with shared bandwidth This is commonly know has h-qos. Not all platforms support it However.. On Feb 2, 2011 4:59 PM, "Pshem Kowalczyk" <[email protected]> wrote: > Hi, > > On 3 February 2011 05:45, Rens <[email protected]> wrote: >> Hi, >> I have 2 subinterfaces (Fa0/1.100 & Fa0/1.200) >> Here are the things I would like: >> 1) rate limit both to 8 Mbps >> 2) never use over 8 Mbps together >> 3) the first subinterface should always have 4 Mbps needed >> Is this possible? > > Depending on your hardware/software you might be able to create a > parent policy attached to the physical interface (Fa0/1) that > classifies traffic based on vlan id (match vlan). Another option to > try (only in inbound direction) is to match on interface (match > input-interface). You might also try attaching one policy to the > physical interface and another to the subinterfaces. > > kind regards > Pshem > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
