Smart Bits----->Access port--->Cisco Switch-->Trunk-->Cisco Switch-->Access
Port--->Smart Bits
If we leave the connection between the 2 switches as an access port link
then we can test across at full 1.0Gbps.
However, it the link between the switches is configured as a trunk we
experience packet loss.
The smaller the packets, the higher the throughput, the higher the errors.
We have tried both ISL and dot1q trunks, as well as setting the nonegotiate
setting on all the ports.
Has anyone else seen anything like this?
Erik J. Fritzler
Director of NOC Services
Dark Fiber Solutions, Inc.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
