On 2/9/2011 2:46 PM, Wil Schultz wrote:
You're going to want to use sub-interfaces for both VLAN's, use "router on a
stick" as your google-fu keywords.
On Feb 9, 2011, at 2:28 PM, Tim Donahue wrote:
interface gigabitEthernet 0/0
ip address 10.1.10.1 255.255.255.0
!
interface gigabitEthernet 0/0.20
encapsulation dot1q 20
ip address 10.1.20.1 255.255.255.0
I don't know about the 3845 specifically, but every Cisco router that I
have worked with that does support sub-interfaces will work just fine
with the above configuration. The gi0/0 will be the native VLAN and
gi0/0.20 will be a tagged VLAN.
--
Jerry Bacon
Senior Network Engineer
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
