Hi Braga, you can use " show platform" command. more detail from "admin" mode.
sample: RP/0/RP0/CPU0:router# show platform Node Type PLIM State Config State ----------------------------------------------------------------------------- 0/0/SP MSC(SP) N/A IOS-XR RUN PWR,NSHUT,MON 0/0/CPU0 MSC 16OC48-POS/DPT IOS-XR RUN PWR,NSHUT,MON 0/2/SP MSC(SP) N/A IOS-XR RUN PWR,NSHUT,MON 0/2/CPU0 MSC 16OC48-POS/DPT IOS-XR RUN PWR,NSHUT,MON 0/RP0/CPU0 RP(Standby) N/A IOS-XR RUN PWR,NSHUT,MON 0/RP1/CPU0 RP(Active) N/A IOS-XR RUN PWR,NSHUT,MON 0/SM0/SP FC/S(SP) N/A IOS-XR RUN PWR,NSHUT,MON here u see MSC is 16OC48 = 16x 2.5Gbps = 40Gbps regards, Rano --- On Fri, 11/2/11, Alessandro Braga <[email protected]> wrote: From: Alessandro Braga <[email protected]> Subject: [c-nsp] MSC Cisco CRS-1 To: "cisco-nsp" <[email protected]> Date: Friday, 11 February, 2011, 10:28 PM Dear, which the command can I use in IOS-XR (CRS-1) to obtain MSC details; eg Performance (20G,40G, 140G). The commands bellow don't show it: show inventory show version I think that 'show diag ?' will show, I'm correct? Brgs, Alessandro Braga _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
