I'm getting this error: ++++++++++++++++++++++++++++++++ SCE8000#show running-config The management-agent is currently not operational. If you proceed, the configuration of the management-agent will not be shown. If the system is waiting for a PQI installation to finish, it is advised to abort this operation now, wait until the management-agent is operational, and then issue this command again. It is possible to query the state of the management-agent by using the CLI command "show management-agent". ++++++++++++++++++++++++++++++++
I'm not able to find anything related with this ? Any hints ? Thanks. Regards, Antonio Soares, CCIE #18473 (R&S/SP) [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
