If I remember correctly, Put the image onto a FAT formatted USB flash stick. Insert the USB stick into the USB 0 or equivalent port on the router and reboot it. Once the router boots up into rommon, do a boot usb0:<image name> or equivalent. Once the router boots up copy the image from the USB stick onto the appropriate flash/bootflash locations and set your boot variables accordingly.
The datasheet says that 1GB flash is supported but I've used a 4GB stick before. Vijay Ramcharan > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Nathaniel Bernadeau > Sent: Thursday, February 17, 2011 2:26 PM > To: [email protected] > Subject: [c-nsp] Does anyone knows how to download IOS on a ASR1002? > > My customer has a ASR1002 with no IOS. How should we go about getting > IOS and downloading onto thee ASR1002? > > Ha said; > > "No IOS was found on the box....flash is empty.. > I cant boot device". > > -- > regards, > > Nathaniel Bernadeau > Gallant Systems, LLC > 11064 Livingston RD Suite 106-C > Fort Washington, MD 20744 > Toll Free: 888-836-3751 > Ph: 301-627-6358 > Fax: 240-823-6897 > Cell: 202-246-2229 > [email protected] > www.gallantsys.com > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
