HI , I am trying to configure the SLB configuration on my 7604 router, But I am not able to telnet port 80 via Virtual IP from customer end.
Following are the configuration:-- ip slb probe KEEPALIVE http ! ip slb probe WOWZA ping address 119.x.x.84 ! ip slb serverfarm WOWZA probe KEEPALIVE probe WOWZA ! real 119.x.x.83 inservice ! real 119.x.x.84 inservice ! ip slb vserver WOWOZA virtual 119.x.x.85 tcp www serverfarm WOWZA inservice Regards Daljit Singh Disclaimer: This e-mail & attachment(s) within it are for sole use of intended recipient(s) & may contain confidential & privileged information. If you are not the intended recipient, please intimate the sender by replying to this email & destroy all copies & the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email or any action taken in reliance on this e-mail is strictly prohibited & unlawful. The recipient acknowledges that COMPANY , its subsidiaries, associated companies or persons authorized by it (collectively "THE Group"), are unable to exercise control, ensure, guarantee the integrity of/over the contents of the information contained in e-mail transmissions & further acknowledges that any views expressed in this message are those of the individual sender & no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of THE Group. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
