Hello umair:
CONFIGURING BFD
BFD can be configured in two steps.
The
first step in configuring BFD is setting the baseline parameters for
all BFD sessions on an interface. The configuration occurs at the
interface level and the syntax is as follows:
[no] bfd interval <50-999> min_rx <1-999> multiplier <3-50>
interval: determines how frequently (in milliseconds) BFD packets will be sent
to BFD peers.
min_rx: determines how frequently (in milliseconds) BFD packets will be
expected to be received from BFD peers
multiplier:
The number of consecutive BFD packets which must be missed from a BFD
peer before declaring that peer unavailable, and informing the
higher-layer protocols of the failure
the second step Once
the baseline parameters have been set, individual protocols must be
informed that they will be using BFD for failure detection.
In
the first release of BFD, the supported protocols are OSPF, IS-IS,
EIGRP and BGP.
on the concerned interface you specify BFD.
example:
interface GigabitEthernet1/2
ip ospf network point-to-point
ip ospf cost 1000
ip ospf hello-interval 3
ip ospf dead-interval 10
ip ospf bfd
router ospf 1
log-adjacency-changes
bfd interval 50 min_rx 50 multiplier 5
Kind Regards
Said IzawiSenior Network Analyst
From: cisco-nsp-requ...@puck.nether.net
Subject: cisco-nsp Digest, Vol 99, Issue 67
To: cisco-nsp@puck.nether.net
Date: Wed, 23 Feb 2011 09:23:04 -0500
Send cisco-nsp mailing list submissions to
cisco-nsp@puck.nether.net
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-nsp
or, via email, send a message with subject or body 'help' to
cisco-nsp-requ...@puck.nether.net
You can reach the person managing the list at
cisco-nsp-ow...@puck.nether.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-nsp digest..."
--Forwarded Message Attachment--
From: umair.sae...@live.com
To: cisco-nsp@puck.nether.net
Date: Wed, 23 Feb 2011 06:26:00 +0000
Subject: [c-nsp] BFD neighbor up/down in log with Static
Dear all,
I wanted to know that can any one know the command to enable logging of BFD
neighbor status in routers log.
I have already enables snmp traps but i need to show these in router logs.
We are using BFD with static routing.
Thanks & Best Regards, Umair SaeedAM IP Operations Core South ,
Pakistan Telecommunication Company Ltd,
Phone # +92 333 2354591
--Forwarded Message Attachment--
From: h...@efes.iucc.ac.il
To: cisco-nsp@puck.nether.net
Date: Wed, 23 Feb 2011 08:55:17 +0200
Subject: Re: [c-nsp] flow-export to more than 2?
>Platforms which have implemented FNF or some subset thereof (N7K, CRS-1,
>ASR9K, et. al.) can support multiple exporters.
What about 7600s? Any IOS train that handles more than 2 exporters?
Thanks,
Hank
--Forwarded Message Attachment--
From: vikasshar...@gmail.com
To: cisco-nsp@puck.nether.net
Date: Wed, 23 Feb 2011 13:44:47 +0530
Subject: [c-nsp] CRS-1 Policy change
Hi,
I have a policy which I can see currently not applied on any interface, I
am trying to modify the policy (remove existing class-map and add new
class-map), but when I commit I see following message "!!% Policy manager
does not support this feature: Platform does not support policy-map
modification type "qos"
I am sure this policy is not anywhere attached as otherwise I would see
following error "!!% Object is in use: Class-map "Default-From-CR-SAR" of
type "qos" is used bypolicy-map(s). Delete failed"
This is on CRS1 XR rel 3.6.2
am I missing something?
Regards,
Vikas
--Forwarded Message Attachment--
From: bandh...@gmail.com
CC: cisco-nsp@puck.nether.net
To: vikasshar...@gmail.com
Date: Wed, 23 Feb 2011 14:49:12 +0500
Subject: Re: [c-nsp] CRS-1 Policy change
Can you please confirm the modified configuration / new class-map? We are
running same version on CRS-1s with no. of policies & modification on need
basis. This should not be the case...
-FJ
On Wed, Feb 23, 2011 at 1:14 PM, Vikas Sharma <vikasshar...@gmail.com>wrote:
> Hi,
>
> I have a policy which I can see currently not applied on any interface, I
> am trying to modify the policy (remove existing class-map and add new
> class-map), but when I commit I see following message "!!% Policy manager
> does not support this feature: Platform does not support policy-map
> modification type "qos"
>
> I am sure this policy is not anywhere attached as otherwise I would see
> following error "!!% Object is in use: Class-map "Default-From-CR-SAR" of
> type "qos" is used bypolicy-map(s). Delete failed"
>
> This is on CRS1 XR rel 3.6.2
>
> am I missing something?
>
> Regards,
> Vikas
> _______________________________________________
> cisco-nsp mailing list cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
--Forwarded Message Attachment--
From: vikasshar...@gmail.com
CC: cisco-nsp@puck.nether.net
To: bandh...@gmail.com
Date: Wed, 23 Feb 2011 15:52:50 +0530
Subject: Re: [c-nsp] CRS-1 Policy change
Hi Farhan,
All other policies I am able to modify except this. Also this is the only
policy with qos-group (for incoming packets)
policy-map CR_QOS_FROM_PE-CORE
class Premium-From-PE_CORE
set qos-group 5
!
class Business1-From-PE-CORE
set qos-group 3
!
class Business2-From-PE-CORE
set qos-group 2
!
class Business3-From-PE-CORE
set qos-group 1
!
class Routing-Management-From-PE-CORE
set qos-group 6
!
class Default-From-PE-CORE
set qos-group 0
!
class Multicast-From-PE-CORE
set qos-group 4
!
class class-default
!
end-policy-map
Regards,
Vikas
On Wed, Feb 23, 2011 at 3:19 PM, Farhan Jaffer <bandh...@gmail.com> wrote:
> Can you please confirm the modified configuration / new class-map? We are
> running same version on CRS-1s with no. of policies & modification on need
> basis. This should not be the case...
>
> -FJ
>
> On Wed, Feb 23, 2011 at 1:14 PM, Vikas Sharma <vikasshar...@gmail.com>wrote:
>
>> Hi,
>>
>> I have a policy which I can see currently not applied on any interface, I
>> am trying to modify the policy (remove existing class-map and add new
>> class-map), but when I commit I see following message "!!% Policy manager
>> does not support this feature: Platform does not support policy-map
>> modification type "qos"
>>
>> I am sure this policy is not anywhere attached as otherwise I would see
>> following error "!!% Object is in use: Class-map "Default-From-PE-CORE" of
>> type "qos" is used bypolicy-map(s). Delete failed"
>>
>> This is on CRS1 XR rel 3.6.2
>>
>> am I missing something?
>>
>> Regards,
>> Vikas
>> _______________________________________________
>> cisco-nsp mailing list cisco-nsp@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>
--Forwarded Message Attachment--
From: alex.nyaga...@gmail.com
To: cisco-nsp@puck.nether.net
Date: Wed, 23 Feb 2011 14:19:06 +0300
Subject: [c-nsp] CRC Errors on Ethernet Router
Hi All,
I am noting CRC errors on my Ethernet port on my cisco router, what could it
be causing it..
--
**
--Forwarded Message Attachment--
From: li...@puzza.org
To: cisco-nsp@puck.nether.net
Date: Wed, 23 Feb 2011 21:35:38 +1000
Subject: Re: [c-nsp] CRC Errors on Ethernet Router
On 23/02/2011 9:19 PM, alex nyagah wrote:
> Hi All,
>
> I am noting CRC errors on my Ethernet port on my cisco router, what could it
> be causing it..
>
duplex mismatch, bad cable, cosmic rays.
Send though a show interface from both ends.
-James.
--Forwarded Message Attachment--
From: j...@bovre.no
To: cisco-nsp@puck.nether.net
Date: Wed, 23 Feb 2011 12:48:59 +0100
Subject: Re: [c-nsp] CRC Errors on Ethernet Router
duplex?
On 23.02.2011 12:19, alex nyagah wrote:
> Hi All,
>
> I am noting CRC errors on my Ethernet port on my cisco router, what could it
> be causing it..
>
--Forwarded Message Attachment--
From: swm...@swm.pp.se
CC: cisco-nsp@puck.nether.net
To: alex.nyaga...@gmail.com
Date: Wed, 23 Feb 2011 13:09:43 +0100
Subject: Re: [c-nsp] CRC Errors on Ethernet Router
On Wed, 23 Feb 2011, alex nyagah wrote:
> I am noting CRC errors on my Ethernet port on my cisco router, what
> could it be causing it..
You have to provide more information. Is this copper or fiber, what speed,
what is at the other end, how long is the cable etc.
--
Mikael Abrahamsson email: swm...@swm.pp.se
--Forwarded Message Attachment--
From: farooq_...@hotmail.com
To: cisco-nsp@puck.nether.net
Date: Wed, 23 Feb 2011 18:08:39 +0500
Subject: [c-nsp] Integration of Cisco CSM 3.3.1 with Cisco ACS 4.2
Dear
I intergrated Cisco CSM 3.3.1 with Cisco ACS 4.2. After intergreting i am able
to login with ACS users and user defined in system identity setup but i have
don't have the sufficient previledge assiged (even i can't see the devices
added in CMS).
Also when CSM communicate first time with ACS it generated some roles in shared
profile in ACS which is also missing in my case..
Pls help me out urgently
--Forwarded Message Attachment--
From: buz.d...@usg.edu
To: alex.nyaga...@gmail.com; cisco-nsp@puck.nether.net
Date: Wed, 23 Feb 2011 08:53:11 -0500
Subject: Re: [c-nsp] CRC Errors on Ethernet Router
First thing I would do would be to check for a duplex mismatch and then check
the wiring (either by replacing the cable if it's a simple patch or using a
cable tester over the span.) You might also just physically trace it and see if
someone decided to hang a fluorescent light off of it or something too.
Luck,
Buz
-----Original Message-----
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of alex nyagah
Sent: Wednesday, February 23, 2011 6:19 AM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] CRC Errors on Ethernet Router
Hi All,
I am noting CRC errors on my Ethernet port on my cisco router, what could it
be causing it..
--
**
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
