Just add the * option in your show mrib route ios-xr command to see the shared tree entries
You may see a difference between show mrib route * and show mfib route * table. R/ On Fri, Feb 25, 2011 at 12:40 AM, John Neiberger <[email protected]>wrote: > We're seeing a little weirdness that we're having trouble deciphering. > We have a multicast source connected to a 7600 and we're using SSM. If > the source starts sending, an mroute entry is created in the mroute > table immediately, whether or not anything is joining the group. So, > prior to anything actually joining the group, we can see which groups > that source is sending to simply by doing a "show ip mroute". > > The behavior is different on the ASR9k. On that platform, there are no > entries in the mrib when the source is sending. The mrib entries are > not created until something joins the group. Once the receiver leaves > the group, the mrib entries disappear. This is not expected behavior > and we've had a few people from Cisco say that multicast state should > be created if the source is sending, whether or not anything is > joining. > > Do any of you have any idea why this behavior is different on the ASR? > > Thanks! > John > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
