I can't comment on the CSS for layer 7 routing, but we use the F5 LTM (BigIP) 
to do plenty of L7 manipulation via iRules.

Depending on the load on the VIP and the horsepower of the load balancer you 
would do well to stay out of manipulation that has to do with any body content 
and use the HTTP headers exclusively, like cookie values, hostnames, etc.

Good luck.

-wil


On Mar 10, 2011, at 10:48 AM, Sam Hall wrote:

> Hi Guys
> 
> We have a couple of Cisco CSS11501's and are exploring the possibility if 
> they can load balance based on text found in packets i.e. "regular 
> expression"...
> 
> We need to migrate individual client's traffic one by one to a new 
> environment, this is a TCP 443 session that has no context path and 
> destination IP and port needs to stay the same, so L3-L5 redirection is not 
> possible.
> 
> Thought that there must be some L7 inspection that could find a key word i.e. 
> client name in the packet and direct that client to the new environment?   We 
> run apps that use the following:
> 
> 
> *   xml
> *   soap
> *   iso8583
> *   obs
> *   apacs
> 
> Any ideas would be very helpful, if the CSS isn't up for the job, any other 
> load balancers suggestions would be welcome...
> 
> Thanks in advance
> 
> 
> 
> Sam Hall
> Senior Network Engineer
> 
> direct +44 (0)1252 644 287
> email [email protected]<mailto:[email protected]>
> 
> Follow us on our Twitter account<http://twitter.com/thelogicgroup> for all 
> the latest developments at The Logic Group.
> 
> 
> [http://www.the-logic-group.com/CP/UploadedImages/75bd388c-1f27-41f4-8f68-adf034d0b2ea.jpg]
>     
> <http://www.the-logic-group.com/CP/UploadedImages/75bd388c-1f27-41f4-8f68-adf034d0b2ea.jpg>
> 
> 
> The Logic Group Enterprises Limited, Logic House, Waterfront Business Park, 
> Fleet Road, Fleet,
> Hampshire, GU51 3SB, United Kingdom. Registered in England. Registered No. 
> 2609323
> 
> 
> The information in this email and any attachments are confidential and may be 
> legally privileged and protected by law. It is for the intended recipient 
> only. If you are not the intended recipient you may not use, disclose, copy, 
> distribute, print or rely on the content of this email or its attachments. If 
> this email has been received by you in error please advise the sender and 
> delete the email from your system.
> 
> 
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to