Hi Sur, basically switch-module is to make router have switch features, but for your questions you need to reconsider the purpose. 1 .how do I configure Dynamic routing from switch module such as OSPF and adjacency it's own C3945 router chasis ?you will need licence and advanced IOS feature in the switch to run routing protocol and how do you talk with router, it just use the interface (ip address) that connected to main router. to verify this use : show cdp neighbor and you will see the switch moduleie: interface GigabitEthernet2/0 description Trunk port to Etherswitch Service Module ip address 172.0.0.100 255.255.255.0!SUGGESTION: why you would do that? you are sharing same processor and memory!!wouldn't it more wise if you make sub-interface then run the routing protocol within router directly? 2. the switch module, that like emulate IOS C35560 Switch ? not sure what you are asking, but switch module is running cisco catalyst IOS
regards,RANO --- On Sat, 26/3/11, suryantofang <[email protected]> wrote: From: suryantofang <[email protected]> Subject: [c-nsp] Cisco 3945 With SM-ES2-16-P module To: [email protected] Date: Saturday, 26 March, 2011, 8:35 AM Dear Guys, Right now I have brand new C3945 Router with SM-ES2-16-P module insert to the chassis. when I need to configure the switch I need to execute service-module command. Need your opinion : 1 .how do I configure Dynamic routing from switch module such as OSPF and adjacency it's own C3945 router chasis ? 2. the switch module, that like emulate IOS C35560 Switch ? notes: RC3945#dir Directory of flash0:/ 1 -rw- 58991496 Jan 10 2011 18:32:30 +07:00 c3900-universalk9-mz.SPA.151-2.T2.bin 2 -rw- 2903 Jan 10 2011 18:54:30 +07:00 cpconfig-39xx.cfg 3 -rw- 2941440 Jan 10 2011 18:54:42 +07:00 cpexpress.tar 4 -rw- 1038 Jan 10 2011 18:54:52 +07:00 home.shtml 5 -rw- 115712 Jan 10 2011 18:55:00 +07:00 home.tar 6 -rw- 1697952 Jan 10 2011 18:55:14 +07:00 securedesktop-ios-3.1.1.45-k9.pkg 7 -rw- 415956 Jan 10 2011 18:55:28 +07:00 sslclient-win-1.1.4.176.pkg when I go inside switch module with executed : the service-module interface slot/port session command Sw35560#dir Directory of flash:/ 4 -rwx 1048 Mar 1 1993 00:01:20 +00:00 multiple-fs 2 -rwx 13437143 Apr 20 1905 18:37:01 +00:00 c3560e-universalk9-mz.122-52.EX1.bin my guide that already use when configure : http://www.cisco.com/en/US/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html I thank you in advanced for the oppinion and help. Warm Regards, -SuryantoFang- " Hey, It's my learning time..!!!" _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
