Hi Scott, First it's a big thank for your suggestion to use higher port number ie;4000+, after bringing the router to OFFLINE server, we found the 0xFF can be transmitted in/out asyn line. After this we going back to try again in live server.i don't know why it won't work before. but since now we hav a good news, is a relief.
regards,Rano --- On Fri, 25/3/11, Hughes, Scott GRE-MG <[email protected]> wrote: From: Hughes, Scott GRE-MG <[email protected]> Subject: Re: [c-nsp] 2911 Terminal Server 8bits character problem To: "Chubby" <[email protected]> Cc: "Andrew Gray" <[email protected]>, "[email protected]" <[email protected]> Date: Friday, 25 March, 2011, 7:21 PM Try using tcp port 400x instead of port 200x. On Mar 24, 2011, at 9:17 PM, "Chubby" <[email protected]> wrote: > Hi Andrew, > > This is a reverse telnet session that communicate using Serial <> TCP > > 0xFF is part of data payload, and I can not find a way to double the content > of payload ie: "0xFF 0xFF" > > The config is: > Line 0/0/0 > No exec > Exec-timeout 0 0 > Data-character-bits 8 > Exec-character-bit 8 > Transport input all > Telnet transparent > Telnet refuse-negotiation > ! > > Best Regards, > > Ranokarno > Powered by NCS > > On Mar 25, 2011, at 2:48 AM, Andrew Gray <[email protected]> wrote: > >> This sounds like you're telnet'ing in with something other than telnet - >> 0xFF is the Telnet escape character - it's expecting another control code >> after 0xFF to negotiate options and such. To send a single 0xFF onward, you >> need to double it, i.e. 0xFF 0xFF. >> Rano Karno writes: >>> the issue is whenever server make a session to terminal host and sending >>> "FF" hexa, it seem the router did not transmit it to terminal host, thus >>> make the system hang. >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ NOTICE TO RECIPIENT: The information contained in this message from Great River Energy and any attachments are confidential and intended only for the named recipient(s). If you have received this message in error, you are prohibited from copying, distributing or using the information. Please contact the sender immediately by return email and delete the original message. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
