References: <[email protected]> <2503de55ba5e394390f26298212b1381026e6b44f...@exvmbx017-1.exch017.msoutlookonline.net> <[email protected]> <2503de55ba5e394390f26298212b1381026e6b450...@exvmbx017-1.exch017.msoutlookonline.net> <[email protected]> <[email protected]> <2503de55ba5e394390f26298212b1381026e6b450...@exvmbx017-1.exch017.msoutlookonline.net> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <2503de55ba5e394390f26298212b1381026e6b450...@exvmbx017-1.exch017.msoutlookonline.net> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <201103290221.p2T2LgU5001388@mtv-core-4.! cisco.com> <[email protected]> To: Roland Dobbins <[email protected]>, Tim Stevenson <[email protected]>, [email protected] X-Mailer: Apple Mail (2.1084) Return-Path: [email protected] X-OriginalArrivalTime: 29 Mar 2011 04:17:44.0759 (UTC) FILETIME On 29/03/2011, at 1:51 PM, Dobbins, Roland wrote: >> You can configure FP edge ports into PVLANs. A few guidelines here: > > Does it support community and isolated modes, and protected edge ports? > > Are VACLs/PACLs/Source Guard/DHCP Snooping supported, as well?
whether you run an L2 'edge' port as FabricPath or classical ethernet (e.g. STP) does not change the features that can be enabled on that port. yes, you can use any of what you suggest with FP. its orthogonal. generally speaking, feature availability depends on the capabilities of the forwarding engine operating the port (e.g. what the M1 I/O module forwarding engine supports or F1 I/O module forwarding engine), not whether a VLAN exists within the space of FabricPath or Classical Ethernet. On 29/03/2011, at 1:21 PM, Tim Stevenson wrote: >> 3) In the docs it recommends not to use the vPC peer switch feature. Is >> this because of the multipath calc in the FP domain? Any implications >> from a STP role change here? > > Hm. Don't know offhand where that recommendation comes from, I can check into > it. Maybe Lincoln knows. i don't know either. i can't see why docs state vPC peer-switch is not recommended. cheers, lincoln. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
