Hi
Same result on our 7609's at SRE3.
From command reference:
http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_01.html#wp1014717
ip flow-top-talkers
To configure NetFlow top talkers to capture traffic statistics for the
unaggregated top flows of the heaviest traffic
patterns and most-used applications in the network, use the ip
flow-top-talkers command in global configuration mode.
To disable NetFlow top talkers, use the no form of this command.
ip flow-top-talkers
no ip flow-top-talkers
Tip The ip flow-top-talkers command does not appear in the
configuration until you have configured the
top number and sort-by [bytes | packets] commands.
Router(config)# ip flow-top-talkers
Router(config-flow-top-talkers)# top 4
Router(config-flow-top-talkers)# sort-by bytes
When I try to configure:
520-060(config)#ip flow-top-talkers
^
% Invalid input detected at '^' marker.
Assume this to be a bug
Jon h Bøvre
On 29.03.2011 19:53, Alexey wrote:
Hi,
I have updated Cisco IOS c7600rsp72043_rp-ADVENTERPRISEK9-M from version
122-33.SRB4 to 122-33.SRE3 on my Cisco 7600.
Аfter update I can't find command RR(config)#ip flow top-talkers, but in
the enable mode I can see that:
RR#show ip flow top-talkers
% Top talkers not configured
Is this image supports netflow top-talkers?
Thank you for answers.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
