I'm having a problem with incoming SfTP hanging. I can see the
initial handshake occuring but directory listing not coming and giving timeout,
Users trying access our sftp server from public, I am getting the possitive
resulting by running (using 'telnet <servername> 22'). But when i try to
connect sftp from command prompt or through Filezilla then i am getting time
out and no directory showing. This is happening only when my 3660 is a active
hsrp router, and same sftp service will work fine when my 4948 is active hsrp
router.
Actually I'm running two cisco devices (One is 3660 & second is 4948 with BGP
peering with 2 ISPs. we are running HSRP. I have web servers behind these
routers and they seem to be behaving just fine. I'm at a loss as to what could
be causing this problem. I've put known good sftp server on the same network
and had the same issue with it as well. When I trying to connect through our
native network ,it works fine, no delay after the initial handshake. Any
ideas as to what could be causing this or what I should look at?
Regards
Singh
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
