You could use NAT with a rotary pool so that the incoming address is translated in a rotary fashion to a different inside IP. The only downside is that there is no intelligence, so if a server is down NAT will still translate requests to it.
http://www.cisco.com/en/US/docs/ios/ipaddr/command/reference/iad_nat.html#wp1011547 http://sites.google.com/site/amitsciscozone/home/nat/tcp-load-distribution-using-rotary-nat On Mon, Mar 28, 2011 at 9:22 PM, Bayasgalan Bayantur <[email protected]> wrote: > I'm working on a solution where we will be setting up 40 virtual web servers > on a single server using Linux Redhat and VMWare . > > Unfortunately, we only have 3 free public IP addresses to use, so I need to > have a basically a single public IP which would route a request to the > appropriate server. All web server using TCP 80 port. > > which kind of solution in cisco router and switch ? > > > > > -- > *********************** > Таныг хүндэтгэсэн > Б.Баясгалан > *********************** > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
