I have an ASA 5510 that I use for both the head end for Anyconnect clients and Hub and Spoke IPSec tunnels for Lan to Lan.
beside the no Nat, ACL for interesting traffic, and "same-security-traffic permit intra-interface" command is there anything else that needs to be done, in order to have the Anyconnect client access the remote IPSec LAN? TIA Scott _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
