I'm busy with a pair of 3750ME switches in my lab that are supposed to
be the beginning of a Metro MPLS deployment.
I know the whole deal about only using the ES ports to do the MPLS
labelling.
I found an existing config on the switch with MPLS configured on an SVI.
LDP seems to be working. Is this meant to work? Or am I going to get the
finger when I try to move labelled packets over that interface?
--
Graham Beneke
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
