James, Why do you need to advertise multicast routes over BGP?
I multicast, usually, you need to advertise the sources (regular unicast...) to be reachable through the path where multicast is flowing (to make RPF work). The multicast state is usually not propagated using BGP, but using PIM or MSDP... Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of James Yunkin Sent: Friday, April 29, 2011 18:43 To: [email protected] Subject: [c-nsp] MBGP for Multicast with VRF-Lite Hello, This one has us stumped. We have a 7600 running VRF-Lite and we want to run multicast in one of the VRFs. The VRF peers standard eBGP with a Juniper MPLS cloud. I can't seem to figure out how to exchange multicast routes with the Juniper. The "address-family ipv4 multicast" command doesn't have a VRF option, so it ends up putting the peer in global (which obviously is no good). And the "address-family ipv4 vrf <x>" doesn't have a multicast option. How can one send multicast routes via BGP on a VRF-Lite router? Thanks! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
