I'm reading the following on
http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.1/lxvpn/configuration/guide/lesc41lbun.html
=============================================
Different link speeds are allowed within a single bundle, with a maximum
of four times the speed difference between the members of the bundle.
...
Load balancing (the distribution of data between member links) is done
by flow instead of by packet. Data is distributed to a link in
proportion to the bandwidth of the link in relation to its bundle.
...
802.1Q VLAN subinterfaces can be configured on 802.3ad Ethernet link
bundles. Keep this information in mind when adding VLANs on an Ethernet
link bundle:
=============================================
Has anyone tried that?
Any feedback is welcome.
--
Tassos
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
