I would have thought it would appear somewhere really obvious like in a "show interface". The "bia" (burned in address) I would have thought should come from the MAC controller of the interface itself, not from a location stored elsewhere on the router...?
On 10 May 2011 18:10, Antonio Querubin <[email protected]> wrote: > I've had to reset the cookie for a Cisco 1720 which was failing to boot up > due to a checksum failure. Apparently the cookie contents were completely > lost. After resetting the cookie to defaults, it now boots up but because I > was unable to locate the MAC address, it's booting up with a MAC of > 0000.0000.0000. Although I can set the MAC to some random set of bits, I'd > like to restore the original MAC but can't seem to find it even after > popping the cover off. I'm probably not looking in the right place. Is the > MAC not printed anywhere on the device? A google search doesn't turn up any > hints of where it might be. > > Antonio Querubin > e-mail: [email protected] > xmpp: [email protected] > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
