I am trying to create a psuedowire between two 7600 routers and don't seem to be able to get the VC up. I can do it between two 3700 routers at each end but with the 7600s the VC shows DOWN. The infrastructure is the same (testing in a lab environment). Has anyone ever used a pseudowire between two 7600's ?
Trunking is not an option. Diag here, just swap 3725s for 7600s in diag and use int gi4/48 for fe0/0, int gi4/47 swpt acc 222 for Fe 0/1 and created int vlan 222 to add the xconnect statement. http://nncooper2.fortunecity.com/psmpls/LAB%20MPLS6.jpg Any help/ideas appreciated. 7604C#show mpls l2 vc 21 56 LAB TAS B02 Local intf Local circuit Dest address VC ID Status 21 56 LAB TAS B02 ------------- -------------------------- --------------- ---------- ---------- 21 56 LAB TAS B02 Vl222 Eth VLAN 222 1.10.1.10 222 DOWN 7604D#sho mpls l2 vc 21 55 LAB TAS B02 Local intf Local circuit Dest address VC ID Status 21 55 LAB TAS B02 ------------- -------------------------- --------------- ---------- ---------- 21 55 LAB TAS B02 Vl222 Eth VLAN 222 1.10.1.9 222 DOWN 21 55 LAB TAS B02 7604D# 3725B#sho mpls l2 vc 21 47 LAB TAS B02 21 47 LAB TAS B02 Local intf Local circuit Dest address VC ID Status 21 47 LAB TAS B02 ------------- -------------------------- --------------- ---------- ---------- 21 47 LAB TAS B02 Fa0/1.222 Eth VLAN 222 1.10.1.7 222 UP 21 47 LAB TAS B02 3725B# _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
