Anyone? Otherwise gonna ask TAC, just want to verify my thoughts. Thanks,
Chuck -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Church, Charles Sent: Monday, May 16, 2011 6:07 PM To: nsp-cisco Subject: [c-nsp] 6500 VSS question All, Noticed an unexpected result today when testing VSS failover. Our setup has dual sups in each chassis, with a supervisor port of each chassis connecting to the matching supervisor port on the other chassis, i.e. 1/5/4 connects to 2/5/4, and 1/6/4 connects to 2/6/4. Today when pulling out the active sup, the hot-standby took over immediately as it should, but we noticed all the linecards in the chassis with the pulled sup resetting. I was under the assumption that a sup transitioning from RPR-warm to standby hot would remain forwarding at L2, thus keeping the VSL up. Now I'm questioning that. It would explain the result, as the linecards couldn't get to an active supervisor. I'm thinking I should have a third VSL link (of that port channel) on a non-sup linecard. When we did the eFSU, we noticed real long outages of the linecards of the chassis getting the final reload as well. Possibly the same issue, no connectivity to the active sup? Thanks, Chuck _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
