Dear all;
i faced a packet passing problem between Cisco 3750G and & Cisco 7206vxr.Switch and router point to point connected also shown switch interface is up. Cisco Switch; Cisco WS-C3750G-24PS (PowerPC405) processor (revision F0) with 118784K/12280K bytes of memory. Last reset from power-on 3 Virtual Ethernet interfaces 28 Gigabit Ethernet interfaces Port configuration: interface GigabitEthernet1/0/1 description PP2.CORE power inline never switchport access vlan 102 switchport mode access load-interval 30 speed 100 duplex full Router Port Config : interface FastEthernet1/0 no ip redirects no ip unreachables no ip proxy-arp load-interval 30 duplex full Router Information: Cisco Internetwork Operating System Software IOS (tm) 7200 Software (C7200-IS-M), Version 12.3(1a), RELEASE SOFTWARE (fc1) Image text-base: 0x60008954, data-base: 0x61C02000 ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(13)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) System image file is "sup-slot0:/c7200-is-mz.123-1a.bin" cisco 7204VXR (NPE225) processor (revision A) with 245760K/16384K bytes of memory. R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache 4 slot VXR midplane, Version 2.1 if you have any idea please share it. thanks jahangir _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
