I found when testing this a shut/noshut was required on the Dialer interface.
-Shane On 31/05/2011, at 2:59 AM, ccie wrote: > > > Hi Experts, > > > > Even I configure the dydns 100% correctly but it still not working even the > debug doesn't give me any thing > > Debug ip ddns update > > !Nothing > > ip ddns update method mytest > > HTTP > > add http://xxxxx:[email protected]/nic/update?system=dyndns > <http://xxxxx:[email protected]/nic/update?system=dyndns&hostname=%3ch > %3e&myip=%3ca> &hostname=<h>&myip=<a> > > interval maximum 1 0 0 0 > > > > Int dialer 1 > > interface dialer 1 > > ip ddns update hostname ashrafalbayed.dyndns.org > > ip ddns update mytest > > > > What is wrong that doesn't show anything in the debug. > > > > > > Regards, > > Amin > > > > > > Amin > > AXIZO.COM > > Previously name Horizon > > ' +970-2-2988128 | 7 +970-2-2988128 |P +970-59-9367950 | . > <mailto:[email protected]> [email protected] > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
