One time we had the same issue -first wth p2p command configured (removed this
command and adjacency came up), and second -we added p2p command to broadcast
link and adjacency came up. Both times the problem was with juniper filtering
-we used transit provider.
the point is that MAC addreses for Serial and LAN hello are different
The MAC-level broadcast addresses are:
01-80-C2-00-00-15 for Level 2 adjacencies (AllL2ISs)
01-80-C2-00-00-14 for Level 1 adjacencies (AllL1ISs)
The MAC-level point-to-point addresses are:
09-00-2B-00-00-04 (AllEndSystems)
09-00-2B-00-00-05 (AllIntermediateSystems)
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
